澳门·威尼克斯人(中国区)官方网站

教育背景：

2006.09—2012.01  清华大学机械工程系直博  工学博士
2002.09—2006.07  北京科技大学材料成型及控制工程专业  工学学士

工作履历：

2021.01—至今    澳门·威尼克斯人(中国区)官方网站 副教授
2016.03—2020.12  澳门·威尼克斯人(中国区)官方网站  助理教授、特聘副研究员
2014.08—2016.02  深圳光韵达光电科技股份有限公司  3D打印事业部
2012.04—2014.07  清华大学深圳研究生院先进制造学部  博士后

主持项目：

1. 国家自然科学基金青年基金——基于低温直写的3D打印三维锂离子电池制造及电池性能研究
2. 广东省科技计划项目增材制造重大专项——金属3D打印在复杂随形冷却模具制造中的应用示范
3. 深圳市技术攻关项目——激光复合增减材制造装备研发
4. 深圳市基础研究自由探索——低温直写3D打印制备微型三维锂离子电池
5. 深圳市工信局项目——激光复合增减材制造装备及其自动化生产线研制
6. 深圳市国际科技合作项目——基于金属增材制造的高效换热器创新设计、制造及应用研究

代表期刊论文 ：

[1] Changyong Liu, Yin Qiu, Yanliang Liu, Kun Xu, Ning Zhao, Changshi Lao, Jun Shen, Zhangwei Chen*. Novel 3D grid porous Li4Ti5O12 thick electrodes fabricated by 3D printing for high performance lithium-ion batteries. Journal of Advanced Ceramics, 2022, 11(2): 295-307.
[2] Changyong Liu*, Ning Zhao, Kun Xu, Yide Li, Jean Pierre Mwizerwa, Jun Shen, Zhangwei Chen*. High performance LiFePO4 and SiO@C/graphite interdigitated full lithium-ion battery fabricated via low temperature direct write 3D printing. Materials Today Energy, 2022, 29: 101098.
[3] Jean Pierre Mwizerwa, Changyong Liu*, Kun Xu, Ning Zhao, Yide Li, Zhangwei Chen, Jun Shen. Three-dimensional printed Lithium Iron Phosphate coated with Magnesium Oxide cathode with improved areal capacity and ultralong cycling stability for high performance lithium-ion batteries. Journal of Colloid and Interface Science, 2022, 623: 168-181.
[4] Kun Xu, Ning Zhao, Yide Li, Pei Wang, Zhiyuan Liu, Zhangwei Chen, Jun Shen, Changyong Liu*. 3D printing of ultrathick natural graphite anodes for high-performance interdigitated three-dimensional lithium-ion =batteries. Electrochemistry Communications, 2022, 139: 107312.
[5] Jean Pierre Mwizerwa, Changyong Liu*, Kun Xu, Ning Zhao, Zhangwei Chen, Jun Shen. In-situ solution phase synthesis of LiFePO4@VSe2 composite as highly active cathode for Li-ion batteries. Journal of Alloys and Compounds, 2022, 901: 163639.
[6] Jiuxin Ning, Xiaodong Wang, Yajing Sun, Chenggang Zheng, Shengwu Zhang, Xi Zhao, Changyong Liu*, Wentao Yan*. Experimental and numerical investigation of additively manufactured novel compact plate-fin heat exchanger. International Journal of Heat and Mass Transfer, 2022, 190: 122818.
[7] Changyong Liu, Deng Yan, Jianwei Tan, Zhuokeng Mai, Zhixiang Cai, Yuhong Dai, Mingguang Jiang, Pei Wang, Zhiyuan Liu, Chia-chen Li, Changshi Lao*, Zhangwei Chen*. Development and experimental validation of a hybrid selective laser melting and CNC milling system. Additive Manufacturing, 2020, 36: 101550.
[8] Changyong Liu#*, Feng Xu#, Yanliang Liu, Jun Ma*, Peiqi Liu, Daming Wang, Changshi Lao, Zhangwei Chen*. High mass loading ultrathick porous Li4Ti5O12 electrodes with improved areal capacity fabricated via low temperature direct writing. Electrochimica Acta, 2019, 314: 81-88.
[9] C.Y. Liu, J.D. Tong, M.G. Jiang*, Z.W. Chen, G. Xu, H.B. Liao, P. Wang, X.Y. Wang, M. Xu, C.S. Lao**. Effect of scanning strategy on microstructure and mechanical properties of selective laser melted reduced activation ferritic/martensitic steel. Materials Science & Engineering A, 2019(766), 138364.
[10] Changyong Liu*, Feng Xu, Xingxing Cheng, Junda Tong, Yanliang Liu, Zhangwei Chen, Changshi Lao*, Jun Ma*. Comparative study on the electrochemical performance of LiFePO4 cathodes fabricated via low temperature 3D printing, direct ink writing and conventional roller coating process. Ceramics International, 2019, 45: 14188-14197.

代表会议论文：

[1]Liu Changyong, Cheng Xingxing, Lao Changshi. The application of 3D printing in lithium-ion batteries. ICMECA2017. 机械工程与控制自动化国际学术会议2017，江苏南京
[2]刘长勇, 程星星, 陈张伟, 劳长石. 低温沉积3D打印制备LiFePO4正极及其电化学性能. 2017年全国特种加工学会年会, 广东, 广州
[3]Liu Changyong, Zhang Renji, Yan Yongnian. Thermo-mechanical numerical simulation on P91 closed upsetting process. International Conference on Manufacturing Science and Engineering, 2009. Advanced Materials Research, 2010, 97-101: 135-139. (EI)
[4]Changyong Liu, Lei Zhang, Feiyu Kang. Experimental study on heat transfer boundary conditions for steel hot extrusion process. The 2nd International Conference on Materials Science and Engineering, Advanced Materials Research, 2013, Vol. 668: 856-860. (EI)

代表专利：

[1] 刘长勇, 颜永年, 张人佶, 等. 一种预应力钢丝缠绕挤压筒, 发明专利, 2019.2.12, 授权号: ZL201110343913.X
[2] 刘长勇, 弥胜利, 刘多静等. 一种三维细胞打印装置, 发明专利, 授权号:ZL201410023914.X
[3] 刘长勇, 弥胜利, 孙伟, 等. 生物材料三维成形设备及其挤出喷头,发明专利, 授权号:ZL201310566068.1
[4] 刘长勇, 王浩, 涂细安等. 一种模具的修复改造方法, 发明专利,授权号:ZL201510372687.6
[5] 刘长勇, 劳长石, 肖崇梁, 库志喻 一种金属3D打印模具异型水路性能测试系统, 发明专利, 授权号: ZL201610914757.0

代表著作：

获得荣誉：

深圳大学教学成果奖一等奖（排名第二）、本科教学单项奖、指导本科生获得全国大学生机械创新设计大学广东省一等奖、中国3D打印创意设计大赛优秀奖等
指导3名研究生获得国家奖学金、1人获得腾讯奖学金、2名研究生获得深圳大学优秀毕业研究生

主要学术兼职：

国家自然科学基金同行评议专家
广东省科技项目评审专家
深圳市科技项目评审专家
中国机械工程学会高级会员
担任若干国际期刊的审稿人等